Quantity   Component name
1 × Raspberry Pi Zero (Works on A+,B+, and 2, *should* work on zero but is untested)
2 × MPU-6050 6 Axis Acclerometer/Gyro
1 × HMC5883L Magnetometer Connectors and Accessories / Board-to-Board and Card Edge Connectors
1 × Ublox NEO-6M GPS
1 × Bluetooth 4.0 USB
1 × 2x 18650 Cells + Holder
2 × Pebble Smartwatch
1 × Blend Micro
1 × Peet Bros Anemometer
1 × 6" long of 2" PVC Mr. Gibbs Unit Housing
1 × 2" PVC Cap Mr. Gibbs Unit Housing
1 × 2" PVC "Clean out" Mr. Gibbs Unit Housing
1 × 12" long of 1.25" PVC Wind Vane Vane Holder
1 × 6" long of 3" PVC Attaches Wind Vane Tube to Mast
1 × 1.25" PVC Clean out
1 × 6" Long of 1" PVC Crows Nest Waterproof Enclosure
2 × 1" PVC Cap Crows Nest Waterproof Enclosure Caps
1 × RJ-9 Connector Connects Peet Bros to waterproof Enclosure
1 × RJ-9 Female Connector Female end of Wind Vane connection
1 × Crows Nest PCB
1 × Mr. Gibbs PCB
1 × Pushbutton
1 × Switch power switch
1 × Voltage Regulator
1 × Female USB port