Hardware Assembly:

(Note: the logs show the steps in a slightly different order, in retrospect the following order would have been easier/better)

1) populate the smd components: https://hackaday.io/project/9467-pigrrl-zero/log/35054

2) hand soldering the raspberry and the powerboost to the baseboard: https://hackaday.io/project/9467-pigrrl-zero/log/35031

3) solder the buttons, the audio socket and then the usb socket: https://hackaday.io/project/9467-pigrrl-zero/log/35096

4) transplant the display from the adafruit board to the baseboard

Software Setup:

Basis: current raspbian

Display: https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/easy-install

Audio: https://learn.adafruit.com/adding-basic-audio-ouput-to-raspberry-pi-zero/pi-zero-pwm-audio

Buttons: (TODO, setup github with custom code/mapping, building upon: https://github.com/adafruit/Adafruit-Retrogame )

Emulation-Station: (TODO)