0%

0%

RetroAndGaming

A guy - with a lab - loves to code - loves to tinker

Norway

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/05/2023.

My Projects

A tapuino build inside an original commodore cassette deck. And getting the counter mechanism working as well.

A Tapuino in a Commodore Cassette Deck

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Reverse engineering the SMA-Q2 smartwatch to run open source firmware on it

Color Open Source Smartwatch

emeryth emeryth

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Run Stremio on Raspberry Pi with a kiosk look

Install Stremio on Raspberry Pi

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

johannes-hassler Johannes Hassler

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Following the work of https://openservo.org/ , continue development on bringing high quality digital servos for robotics

OpenServo 2.0

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Supplyframe DesignLab: 2022 Hackada…

Modular open hardware robot for uROS2 & Microblocks

Rosmo robot

Measurement of uncomplicated electrical consumption using a powerful Blynk Dashboard

Meter PZEM-004 + ESP8266 & Platform IoT Blynk App

The 2018 Hackaday Prize

The ESPWear is a development board for wearables with WiFi using the ESP8266 as core.

ESPWear - ESP8266 for Wearables

pedro-minatel Pedro Minatel

Automate cell information readout from a Liitokala Lii-500 charger by tapping into it's LCD interface

Li-Ion Charger Automation

A simple 3D printed Arduino robot to introduce kids to STEM topics.

LittleBot

M-BUS HAT to extend your Raspberry Pi with smartmetering functions

M-BUS HAT for Raspberry Pi

Beginner IoT project w/ RN4870 Bluetooth Low Energy Module

IoT Geiger Counter w/ RN4870 BLE Module

florian-wilhelm-dirnberger Florian Wilhelm Dirnberger

New open source hardware 1U satellite project.

New open source hardware 1U satellite project.

tranvinhquang TRAN.VINH.QUANG

We are talking about the reinforcement of printed parts. I plan to reinforce the part during printing with a fiberglass paint mesh.

Reinforcement with fiberglass mesh in 3d printing

Monitoring parameters of Greenhouse located at remote location (with no Internet Connectivity), using LoRa IoT

Greenhouse Monitoring System - LoRa IoT

View all

Bits