Quantity   Component name
1 × PJRC Teensy LC Can be replaced with 3.1 or 3.2. Contact me for info on that.
1 × Freescale MPX5010GP Breath pressure sensor.
1 × 3 mm sheet of perspex or plywood Cut to two 250x40x3 mm pieces
1 × Conductive metal tape Alu (for less oxidation) and copper (for solderability)
1 × Electronics wire AWG24 or similar guage
1 × Double sided adhesive tape For securing the Teensy and the breath sensor to the top case.
1 × Fabric tape for electronics Adhesive cloth pcb and wire harness tape. This is awsome stuff.
1 × 4 – 5 mm inner diam food grade silicone tubing You can also put some heat shrink tubing on the sensor first