Quantity   Component name
1 × DFRobot CurieNano A mini Genuino/Arduino 101 board featuring the Intel Curie module, including 6 dof IMU and 3 axis magnetometer
1 × 2mm 10pin XBee Socket - SMD To connect the XBee (transmitter) to the Arduino Pro Mini
1 × Pisound Audio Interface An ultra-low latency high-quality sound card and MIDI interface specially designed for the Raspberry Pi
1 × microSD card Storage to hold the operating system of the Raspberry Pi and the GePS distribution. 4-8GB is comfortably enough space.
1 × Power supply for Raspberry Pi Power supply providing 2.5A USB power to the Raspberry Pi (and Pisound / XBee)
1 × XBee USB Adapter V2 - Atmega8U2 To hook up the XBee (receiver) to the computer (for data transmission, also for configuring the XBees)
1 × Micro-USB Cable To hook up the FTDI breakout / Arduino Pro Mini to the computer
1 × LiPo Cell 850mAh The lithium polymer battery to power the sensor unit
1 × Switched JST-PH 2-Pin SMT right angle breakout board Battery power socket with switch, to turn the instrument on and off
1 × USB LiIon/LiPoly charger For charging the battery
1 × Thin glove, pref. without fingers To attach the sensor unit to your hand. Anything that tightly fits your hand/wrist and allows to be sewed.
2 × XBee 1mW Series 1 Radio link between sensor unit and computer
1 × Raspberry Pi 3 Model B+ The latest (14 March 2018) edition of the famous Raspberry Pi single-board computers