Quantity   Component name
10 × Servo Metal Horns I purchased and used metal horns, although the servos did come with plastic horsn.
16 × Servo Wires with Connector Ends 10 male to male, 4 Split, 2 male to female Extensions
4 × Screws and matching Washers and Locking Nuts For the Rocker and Bogie Shafts, instead of fabricating Steel Rods
40 × Button Head M3 Screws To Connect the Metal Servo Horns to the Round Brackets
24 × M3 Locking Nuts To use on the Differential Cross Members, and the Servo Brackets
6 × 24mm M3 Screws I made my Center Differential Joint accept these, and I also used them on my Bus Linker Housing
2 × T Plug Battery Connectors Used to plug into the Li-Po Battery
1 × Rechargeable Router Used on-Board.