Instructions | Smarter Micro Servo (SMS) MOD

1

Hacking a MG92b : Open the servo

Remove the cover that has the 4 screws, exposing the motor and PCB.
2

Hacking a MG92b : Remove PCB

Unsolder all wires and remove genuine PCB
3

Hacking a MG92b : Wiring the servo

Re-use the servo wires and solder 2 short wires on the motor, 3 short wires on the potentiometer.
4

Hacking a MG92b : Wiring control board

Solder the wires on the tiny control board.
5

Hacking a MG92b : Protect control bard

Use a a piece of heat-shrink sleeve as an envelop, or print a small 3D case to protect the control board.

Smarter Micro Servo (SMS) MOD