Instructions | Prensa de banco impresión 3D

1

Step 1

First, the base is attached to the body with two screws that go into the holes in the base.
2

Step 2

Then the slider is inserted into the body together with the pin. The pin is attached by two small screws to the body.
3

Step 3

Then screw 1 is passed through the pin and screwed to the wall component.
4

Step 4

Once the components are placed, the faces are added to the wall and to the body.
5

Step 5

After this the only step that is left is to attach the vise to a table with the screw n°2.

Prensa de banco impresión 3D