Quantity   Component name
1 × LED lights We decided to use the NeoPixel Digital RGB LED strip we used last time. With the new project, we still needed to light up the lamp with different colors, so this LED was our best option.
1 × Touch sensor The touch sensor, also known as a touch button or touch switch, is commonly employed for device control, such as touchable lamps. It functions similarly to a button but is increasingly replacing traditional buttons in modern devices due to its sleek appearance.
1 × Temperature sensor LM35 We are using the LM35 sensor. It has a supply voltage of 4-20V, a temperature sensitivity of -55°C up to 155°C. It also has an accuracy of ±0.5°C to +25°C and ±1°C from -55°C to +150°C.
1 × Motion sensor For this sensor, we are using SE059. The sensor detects when the module is tilted via a switch closure activated by a metallic rolling ball. It has a digital output and a 3.3V-5 V supply voltage.
1 × Big sound sensor We are using the sound sensor v1.1, this sensor can detect sound waves. The main goal was to use this to detect loud noises made along the story, like voice noises or clapping sounds. It operates with a voltage of 3.3-5V. This sensor is capable of determining noise levels within 100 dB.
1 × Arduino UNO
1 × Box A box big enough to fit a protoboard with all the sensors mentioned.
1 × Protoboard