1 |
× |
Raspberry Pi Zero W(H)
The brainz
|
1 |
× |
L298 Dual H-Bridge Motor Driver (ITEAD Studio Edition)
The muscles, need it to drive the motors
|
1 |
× |
Micro SD Card
At least 4 GB size, UHS-I (Class 10) speed is recommended.
|
5 |
× |
10 or 20 cm Cable with Dupont Connectors - Female to Female
Need them to connect the brainz to the muscles. One of them can be M-F, but F-F will work just fine too.
|
1 |
× |
Spare USB Cable
The one you dont need any more. Coz, you'll have to cut it open and rip it apart!
|
5 |
× |
Cable with Dupont Connectors - Female to Female
They connect the brainz to the muscles. One can be M-F but F-F will work just fine too.
|
1 |
× |
ULTRON Real Power PB6k, 6000mAh
Juice canister, can't do without it. Comes with USB to Micro USB cable - we'll need this one!
|
2 |
× |
Right Angle Geared DC Motor
Your common robot car DC motor. Yes, the yellow one.
|
2 |
× |
Wheel for the DC Motor
Yes, yes, the yellow one (with black tire, of course)
|
1 |
× |
Wide Angle (Fish Eye) Camera Module for Raspberry Pi
The Eye. One and only. Wider angle lets you see more, but the image is... well, a little bit distorted :-(
|
1 |
× |
Raspberry Pi Zero Adapter Cable for Camera Module
Most camera modules for RPi come with standard cable. You'll need this one to make it work on Zero
|
1 |
× |
3D Printed Parts
Chassis, adapters, mount plates and so on... We're working on it...
|