distal.stl4xsla - 199.98 kB - 02/26/2016 at 23:56 |
|
|
middle.stl4xsla - 265.32 kB - 02/26/2016 at 23:56 |
|
|
proximal.stl4xsla - 291.59 kB - 02/26/2016 at 23:56 |
|
|
sla - 174.35 kB - 02/26/2016 at 23:56 |
|
|
sla - 211.70 kB - 02/26/2016 at 23:55 |
|
|
sla - 309.75 kB - 02/26/2016 at 23:56 |
|
|
sla - 187.34 kB - 02/26/2016 at 23:56 |
|
|
spool.stl5xsla - 51.25 kB - 09/08/2016 at 10:23 |
|
|
abductor.stl1xsla - 47.54 kB - 02/26/2016 at 23:56 |
|
|
dorsal.stl1xsla - 97.84 kB - 02/26/2016 at 23:55 |
|
|
palm.stl1xsla - 35.14 kB - 02/26/2016 at 23:56 |
|
|
FreeCAD_src_files.zipFreeCAD source files of all the printable parts of Dextraoctet-stream - 6.51 MB - 10/09/2016 at 22:08 |
|
|
control_board.zipSchematic and gerber files of the Dextra control boardZip Archive - 108.24 kB - 10/09/2016 at 19:52 |
|
|
Firmware.zipDextra firmware for Teensy 3.1, including all the required librariesoctet-stream - 8.32 kB - 10/02/2016 at 19:31 |
|
|
GUI.zipGUI to control Dextra from a PCoctet-stream - 4.23 kB - 10/04/2016 at 10:16 |
|