0%

0%

Engin Cilasun

Little bit of code, little bit of hardware

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/03/2023.

My Projects

TinySys aims to be an entry point into building a fully custom FPGA board. It's currently expands a core FPGA board for development purposes

TinySys - A RISC-V based system on FPGA

Things I've Built

I'm currently working on a risc-v based system as an educational tool to get a hang of complete system design

Projects I Like & Follow

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

swaleh-owais Swaleh Owais

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

An Open Source Continuous Inkjet Printer

CIJ Printer

dominik-meffert Dominik Meffert

The 567 tone decoder is perhaps most famous Phase Locked Loop (PLL) chip. This project looks at an Arduino software PLL.

Software Phase Locked Loop

agpcooper agp.cooper

USB MSD Bootloader for PIC Microcontrollers

USB μC - USB PIC Bootloader

(ab)use the I2S + DMA on the ESP8266 to drive some WS2812(b)'s.

ESP8266 DMA I2S WS2812 Driver

The 2015 Hackaday Prize

An opensource Web platform and cheap sensor hardware solution for the massification of Continuous-flow solution culture (hydroponics)

IoT to Feed the Next Billion

kestler Kestler

Neuron models including Izhikevich dynamics, chemical and electronic synapses, and STDP learning.

Spiking neural net in parallel FPGA hardware

bruce-land Bruce Land

2021 Hackaday Prize

An electric scooter that can be made entirely from printed parts and off the shelf components without any power tools!

RepRaTS 3D Printable E-Scooter

james-dietz James Dietz

How to make IoT projects with Blynk app and ESP8266 WiFi Arduino compatible module

Arduino ESP8266 Blynk tutorial - IoT project

The 2017 Hackaday Prize

The most integrated FPGA module as of 2017

The 'Configum-2' FPGA module

The 2018 Hackaday Prize

Open-Source companion robot for teaching and playing

Rhoby.The Social Robot.

ilyas-akhmetzyanov Ilyas Akhmetzyanov

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

Use ESP32 as the MCU of motherboard for 3D printer.

CNC,3D printer motherboard,ESP32, 8 motors

12 Degrees of Freedom, runs on Windows/Mac/Linux/Android/iOS, 1Kg+ Payload

TiBeast - Quadrupedal Robotic Dog

celestial-robotics Celestial Robotics

IoT-based Home Automation with Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. (Circuit + Code)

Arduino IoT Cloud ESP32 Alexa Control Smart Home

Monitoring parameters of Greenhouse located at remote location (with no Internet Connectivity), using LoRa IoT

Greenhouse Monitoring System - LoRa IoT

Bits