0%

0%

Georg

Future Mechanical Engineer currently 19 years old and fascinated my everything that includes mechanics and electronics

Switzerland, Zurich

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/21/2022.

My Projects

Using a cheap custom PCB and a 3D printed case I build a open source man over board detection system. So everyone can safe lives!

BLE Man Over Board Detection

I'm building a autonomous sailboat for my matura thesis

Building a Autonomous Sailboat

Projects I Like & Follow

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

vojislav-milanovic Vojislav Milanovic

Hackaday Prize 2019

URU Key - a biometric FIDO2 Authenticator built with ESP32 / ATECC508A / FPC1020

URU Key

andrey-ovcharov Andrey Ovcharov

https://www.youtube.com/c/longtechnical More About LongTechnical » How to Program ATMEGA 8,16,328 Attiny and Fuse Bit Hi friends. Tod

HOW TO PROGRAM ATMEGA 8,16,328 ATTINY AND FUSE BIT

Hackaday Prize 2019

Table clock with e-paper display

Agora clock

daniel-zilinec Daniel Zilinec

2021 Hackaday Prize

Hack an optical mouse to detect seismic vibrations with a simple laser source, a hacked mouse lens and a physical cantilever arm setup.

Low-cost seismograph using optical mouse

subir-bhaduri Subir Bhaduri

I found myself being intrigued with the low level safety features of my X201. I experimented with the I2C bus and it got interesting...

Hacking a Supervisor Password - With a Beagle Bone

timo-birnschein Timo Birnschein

Building a set of controllers for Kerbal Space Program including attitude, translation, throttle and hotkey inputs

KSP Controller Hardware

Hackaday Prize 2019

A modular board hosting 9 seven-segment displays that can be daisy chained to make an art installation

A Seven Segment Art Installation

arduino-enigma Arduino Enigma

2021 Hackaday Prize

Roamer is a self-charging, switch free, capacitor powered, wandering robot companion.

Roamer, the Self Charging Companion Robot

mike-rigsby Mike Rigsby

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

Hackaday Prize 2020

Social distancing at the edge

COVID19 Authorized Entry Using Face Mask Detection

rahul-khanna Rahul Khanna

An SPI interface for 6502 microcomputers using discrete logic gates

SPI Master

nate-rivard Nate Rivard

Supplyframe DesignLab: 2022 Hackada…

System to turn wasted retail store house paint pigment into (almost) free art supplies.

Converting Waste Pigments into Art Supplies

technoplastique

Ambient LED artwork created by playing an animated GIF in extreme slow motion with high LED refresh rate, and interpolation between frames.

Continuum - Slow Motion LED Art Display

louis-beaudoin Louis Beaudoin

We will connect LED to NodeMCU and write a simple program that will make LED blink every second.

Starting With NodeMCU Blinking LED - PlatformIO

USB-PD sink with headers compatible with breadboard. Features a fixed 3.3V supply and one-click voltage selection without incorporating MCUs

Low-cost USB-PD Sink for Breadboard (and More)

Idea of combining Acryl and LEDs with printed circuit boards to create a PCB art object.

ATOMPUNK ROCKET LAMP MADE OF BARE PCBS AND LED-LIT

Make time more frustrating

TTL ternary clock

ken-yap Ken Yap

View all

Bits