0%

0%

Jaded Hobo

A builder of embedded hardware and software by day, an intrepid drifter any other time.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/15/2014.

My Projects

Exploring the possibilities of this i.MX6 based board which combines an A9 and M4 core and is Arduino compatible to boost.

First steps with the UDOO neo

This project will explore the the miriad ways to hit that 'trigger' button while both your hands are required to keep a set of probes in pla

Easy 'no hands' trigger

This is a small breakout board for a single IN21a NIXIE tube. The board contains high-voltage drive transistors for each digit.

IN21a NIXIE breakout board

A bench power supply that had been dead for twenty odd years finally gets fixed.

Fixing a Philips PE1509 bench power supply

Projects I Like & Follow

Official Hackaday Prize Entry

SatNOGS is an open source satellite ground station network, optimized for modularity, built using affordable tools and resources.

SatNOGS - Global Network of Ground Stations

pierros-papadeas Pierros Papadeas

The 2016 Hackaday Prize

TCD1304-based linear CCD module driven by a Nucleo F401RE, an STM32F401 black pill or an STM32F103 blue pill

Linear CCD module

esben-rossel esben rossel

Official Hackaday Prize Entry

High Altitude Balloon payload capable of streaming live pictures, gps coordinates, and data telemetry.

CUBEX

Official Hackaday Prize Entry

The uRADMonitor is a plug-and-play, low power, self contained radiation monitoring device, connected to a centralised server component.

Global radiation monitoring network

radu-motisan Radu Motisan

The 2018 Hackaday Prize

A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output

Tiny Solar Energy Module (TSEM)

jasper-sikken Jasper Sikken

The 2016 Hackaday Prize

Network Analyzer on an Arduino Shield which covers from 0-72MHz.

Arduino Network Analyzer

Replicating the PDP-11/70

PiDP-11

2021 Hackaday Prize

Response to Hackaday comments section: a 555 timer in Arduino form factor

Trollduino V1.0

mild-lee-interested Mild Lee Interested

With this project I want to show you how you can make Schlieren-Videography at home. To do so we will use the Moiré-effect.

Schlieren-Videography

jana-marie Jana Marie

The 2017 Hackaday Prize

Or how to build a HF transceiver and learn along the way!

PUZZLE: radio building blocks

mdasilva M.daSilva

Modern take on TIL311 and reimagination of #PICTIL optimized for easier production and lower part count

reTIL

A power supply solution for products requiring up to 600mA @ 5V from 2 x 55F Capacitors and small 5V Solar Panel

Solar Super Capacitor Power Supply

darryl-norman Darryl Norman

Neopixels are sweet! ☺ Driving them is a pain ☹ Stick in a picopixel and put the flashy on all the things!

picopixel

ATtiny45-based Ripoff of Ted Yapo's TritiLED

ATtiny45 EverLED

elliot-williams Elliot Williams

The 2018 Hackaday Prize

Haathi Board aims to be a low cost and developer friendly platform for the iMXRT1050 SoC

Haathi Board

prithvi Prithvi

Official Hackaday Prize Entry

Open Source and Hardware robotics platform

Mobility Shield

Bits