Close
0%
0%

Gnathonemus

Don't feed the fish and don´t knock on the fish tank

Germany
Following
Send a private message
Similar accounts worth following
1 Followers
0 Following
1 Projects
2 Likes
gnathonemus
Send a private message

This user joined on 07/25/2014.

1.7k
7
0
2
Pimp up the "neje" style engraver to expose UV sensistive PCB
Project Owner Contributor

NEJE PCB Exposer

gnathonemusGnathonemus

323.7k
2.8k
110
1.6k
A printable robot arm, a little bigger than the usual hobby servo once.
Project Owner Contributor

3D Printable Robot Arm

andreas-hoelldorferAndreas Hoelldorfer

126k
1.3k
86
674
A family of tiny robots, each with their own way of life.
Project Owner Contributor

Tiny robot family

shlonkinshlonkin

124.3k
1.4k
26
538
Goal: To assemble a working CO2 Laser from a minimum investment using only tools one can find at your average home improvement store.
Project Owner Contributor

Low Cost CO2 Laser Build

thundersqueakThunderSqueak

61.9k
8k
33
289
An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.
Project Owner Contributor

OpenExposer

mario-lukasMario Lukas

27.6k
120
5
66
A fully featured tape emulator for the C64 that loads TAP files from an SD Card and allows the user to interact via an LCD and button panel.
Project Owner Contributor

Tapuino, the $20 C64 Tape Emulator

peter-edwardsPeter Edwards

16.5k
1k
21
160
an electronics pick-n-place retrofit for 3D printers
Project Owner Contributor

Retro Populator

eric-boydEric Boyd

13.8k
90
13
58
- A new take on a 9g Servo Biped Walker
Project Owner Contributor

Tension Biped - A new take on a 9g Servo Walker

hooptie-jHooptie J

13.4k
312
30
144
IoT enabled, servo drive with Ethernet. Platform independent, +/- 0.2° accuracy, 0.2 Nm @ 1000 RPM
Project Owner Contributor

The User friendly Servomotor you hoped existed.

chrisChris

11.6k
91
23
69
I'm building a robot which requires small, articulated joints. Unfortunately I couldn't buy any, so I made my own.
Project Owner Contributor

Custom Articulated Joint

tim-wilkinsonTim Wilkinson

6.8k
24
6
18
Measuring hysteresis curve to determine how useful is that stuff for building motors and magnetic circuits
Project Owner Contributor

Measuring BlackMagic3D's ferromagnetic filament

deepsoicDeepSOIC

5.8k
23
19
21
it's warm so I ordered some pc-case fans to stack them
Project Owner Contributor

I'm a fan of your fan

davedarkodavedarko

5k
366
8
23
Why are grasshoppers so hard to catch? Let's explore the visual neurons behind the grasshopper's escape mechanism!
Project Owner Contributor

Neuroscience of Grasshopper Jumps

dieu-my-nguyenDieu My Nguyen

4.6k
109
4
32
Pick and place machines seems to be popular in these days. So why not to build one?
Project Owner Contributor

basePnP - pick and place machine

hynaHyna

4.3k
56
1
31
The Open Source Drone BLDC Motor Controller
Project Owner Contributor

Tiny BLDC

jose-i-quinonesJose I Quinones

3.6k
17
2
12
LiPo Charger with Load Sharing and Boost Converter
Project Owner Contributor

LiPo Charger + Boost

suleyman-hashiSuleyman Hashi

2.5k
2.2k
3
24
3D printer using a laser to melt the material on a semi stationary bed with minimal components.
Project Owner Contributor

Toner/Laser 3D Printer

thundersqueakThunderSqueak

2.2k
36
0
9
A flexible MOSFET controller board that can be used for a wide range of uses. BLDC, Inverter, three phase motor, Dual H Bridge.
Project Owner Contributor

Flexible MOSFET controller board

ronRon

1.4k
404
3
7
Lower the entry bar to IOT Development as much as possible
Project Owner Contributor

vThing Starter

vladimir-savchenkoVladimir Savchenko

View all

Share this profile

Share

Bits

Send a private message to Gnathonemus

Become cool instantly

Create your Hackaday.io profile like Gnathonemus and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Gnathonemus", please tell us the reason.