This user joined on 09/08/2014.
Åke HedmanThings I've Built
Vilnius - 4 ch. A/D
Vilnius A/D module is a CAN4VSCP based module that have four 10-bit A/D channels for 0-5V or 0-10V and also have two 5V I/O channels that can be set as inputs or outputs. General use is to read analog values and as all other VSCP modules you can
CAN4VSC Power Injector
With the power injector you can power the CAN4VSCP bus and also power up to 16 CAN4VSCP modules using the daisy chain connector. This is a perfect companion board to use when you need to connect a number of CAN4VSCP boards in a cabinet and then
Accra - General counter module
Accra is a general counter module that connects to a CAN4VSCP bus and can count pulses on four channels. The module can be attached to a standard DIN Rail or be mounted directly on a wall. The module fully adopts to the CAN4VSCP specification a
Beijing - General I/O module
Beijing is a general I/O module that connects to a CAN4VSCP bus and can handle general I/O on ten channels that individually can be set as input or output. The module can be attached to a standard DIN Rail or be mounted directly on a wall (order
Odessa - Expansion
Odessa is a 3.3V board that have a Zeus expansion interface. and normally is the base for some of our other products and then also have an expansion board mounted for some particular use. However as the module also can be useful as a starting po
Frankfurt RS-232
Frankfurt RS-232 interfaces serial RS-232 to the CAN4VSCP bus and is powered from the CAN4VSCP bus. It is delivered with a USB to serial adapter free of charge so it can also be connected to host computers that does not have a RS-232 port. It i
Kelvin 1-wire
The Kelvin 1-wire module measures temperature. It measures temperatures from -55°C to +125°C (-67°F to +257°F) with a ±0.5°C accuracy from -10°C to +85°C. It does so by allowing connection of up to eight 1-wire temperature sensors and by measuri
Kelvin NTC10KA
The Kelvin NTC10KA module measures temperature. It measures temperatures in a wide range (depending on what sensors are used) and can achieve 0.1C accuracy with calibration. It does so by allowing connection of up to five external NTC temperatu
Paris Relay module
Paris is a relay module that connects to a CAN4VSCP bus and can control up to seven external relays.
Lutetium
Ted Yapo
jgpeiro
Vijay
Thomas Flayols
BlueFlower
Kevin Kessler
arcade perfect
Jason Webb
Raphael
canique
Marius Heier
Gos